Skip to content

Pick a HUD look. Then burn it onto the lap

A
· 3 min read

Race Ninja's Video Editor now has extra HUD looks for a GoPro overlay. Pick a donut gauge, LED ladder, force bar or speed overlay, then change the font, colour, background and size. Place it on the lap in the browser. The GPS is already in the file, so you don't need a second box.

Onboard kart video at Daytona Milton Keynes with a Race Ninja watermark and HUD overlay gauges: speed donuts, LED ladders, G-force bars and speed bars

The speed on your lap used to be a block of digits. Fine if you only wanted the number. Not if you wanted the clip to look like something you'd actually share.

The Video Editor now has extra HUD looks. Donut gauges that fill as you pick up speed. LED ladders for Power. Speed bars that light like a pit wall. You pick one, drag it, and the file you download is that picture.

What you can put on the clip

Speed gets a donut, a ring, ticks, or a number in the hole. There's a horizontal bar too, in a few fills: a solid rail, colour segments, LEDs, even a broadcast strip with the number sat off to the side.

Power and Braking gets the old pill, a horizontal bar, a tick strip, or an 8-cell ladder. The ladder is the one people keep switching on. Green climbs. Red drops. Same scale as before, just a different face.

Also, checkout "Ash Mode" where you can put a 16:9 video on a 9:16 format video (TikTok/Instagram friendly) with your data, speed, forces or sponsors in the black bars that surround the video. All from within the video editor.

Then you make it yours

The style dropdown is only the start. Change the font. Change the colour of the numbers. Switch the background panel on or off, pick the colour, knock the opacity back if it's shouting. Drag it. Size it. MPH or KPH.

HUD themes still restyle the kit if you want the whole set to match. The watermark moves and resizes too. You won't turn every gauge on at once. That's a mess. Pick the one that matches the story of that lap, then dress it.

You don't strap a second GPS box to the kart

A lot of track day overlays start with a little performance meter on the dash, then an app that burns speed and G-force onto the phone clip. That's extra kit to charge, and extra pairing.

Race Ninja reads the GPS already in the GoPro or DJI file. Same upload you use for lap times. The overlay sits on the analysis, not instead of it.

A lap at Daytona Milton Keynes, dressed properly

You're in the pack. You want the clip to show how hard you were on the brakes into that left. Switch the power meter to ladder. Park a donut in the sky. Keep the Race Ninja watermark on the seat so people know the time's real.

Try it on a session sitting in your garage

Open a results page you've already got. Hit Video Editor. The new looks are in the style dropdown on the donut, the speed bar and the power meter. Change the font and the colour while you're there. Render one lap and hold it next to the preview.

If the camera didn't log GPS, check the camera list before you waste a card. And if you cut in DaVinci or Premiere, the transparent overlay from a couple of weeks ago still sits under this. This update is the look of the HUD, not the editor format. Weather from that lap is still in the tray too, from last week's overlay drop.

Frequently Asked Questions

Can I add a telemetry overlay to GoPro racing video in a browser?
Yes. Upload the original GoPro or DJI file, open the Video Editor on the results page, and place a HUD on the lap. Speed, G-force, lap time and a track map all come from the GPS already in the footage. You download a clip that matches the preview.
Can I customise the font and colour of my racing overlay gauges?
Yes. Each gauge has a style dropdown, plus font, number colour, background on or off, background colour and opacity, size, and drag-to-place. Speed can be MPH or KPH. HUD themes restyle the whole kit if you want a matching set.
Do I need a GPS performance meter for a speed overlay on track day video?
No. Race Ninja reads the GPS your camera already logged. You do not bolt a second box to the kart or pair a phone app to burn speed and G-force onto the clip.
Can I overlay G-force on my kart onboard footage?
Yes. The power meter uses longitudinal G from the session. You can keep the pill, switch to a horizontal bar, a tick strip, or an 8-cell LED ladder. Green is accel. Red is brake. You can change the colours.
What HUD gauges can I put on an onboard racing video?
Speed donuts (segments, numeric, ticks, ring, full), horizontal speed bars (rail, LEDs, broadcast and more), and G-force meters (pill, horizontal, ticks, ladder). Plus lap time, a track map, weather from that lap, and the Race Ninja watermark.
How do I change the look of my racing overlay gauges?
Open the Video Editor, select the donut, speed bar or power meter, and use the style dropdown. Then set the font, colour and background. Drag it, size it, render one lap and check it against the preview.

Step-by-Step Guide

  1. 1

    Upload the original camera file

    Send the GoPro or DJI footage from your garage. Keep the original so the GPS stays attached.

  2. 2

    Open the Video Editor

    On the results page, open Video Editor. The preview is the picture you will download.

  3. 3

    Pick a look and dress it

    Use the style dropdown on the donut, the speed bar or the power meter. Change the font, the number colour and the background. Drag it where you want it. Leave the Race Ninja watermark on if you want people to know the time is real.

  4. 4

    Render one lap and check it

    Render a single lap and hold it next to the preview. If it matches, render the rest.

Link copied, paste it in #session-sharing

0 Comments

Sign in to join the conversation.

Sign In

No comments yet. Be the first to share your thoughts.

More Articles

Related Help Articles